Micro focus X-ray inspection equipment X6800

Advantage

The X-ray source adopts the world's top Japanese Hamamatsu closed X-ray tube, which has a long life and is maintenance-free. X-ray reception adopts a new generation of IRay 5-inch high-definition digital flat-panel detector, eliminating image intensifiers. The flat panel detector instead of the stage can be tilted 60° without sacrificing magnification.Automatic navigation window, where you want to see where to click. Load 10KG super large 530*530mm stage. 5 motion axis linkage system with adjustable speed. The detection program can be edited to realize mass automatic detection, and automatically judge NG or OK. The operation is simple and fast, quickly find the target defect, and two hours of training to get started.

Parameter

X-ray source	Brand	Japan Hamamatsu
	Type	Closed、Micro-focus spot
	Tube voltage	130kV
	Tube current	300μA
	Spot size	5μm
	Function	Preheating automatic
Flat panel detector	Brand	IRay
	Effective area	130mm*130mm
	Pixel size	85μm
	Resolution	1536*1536
	frame rate	20 frame/s
	Tilt angle	60°
Carbon fiber stage	Plateform size	530mm*530mm
	Max pcb	500mm*500mm
	Max load	10kg
Machine	Magnification	Geometric magnification 200X	System magnification1500X
	Max test speed	3 s/point
	Dimension	L 1360mm，W 1365mm，H 1630mm
	Net weight	1350kg
	Power	AC110-220V 50/60HZ
	Max power	1500W
	Computer	I3-7100 CPU, 4G RAM, 240GB SSD
	Display	24 Inch HDMI display
Safety	Radiation leakage	None, international standard: less than 1 microsievert per hour.
	Lead glassobservation window	Transparent lead glass to isolate the radiation to observe the measured object.
	Safety interlockingof front and rear doors	Once the door is opened, the X-ray tube is poweredoff immediately, and the X-ray cannot be turned on when the door is opened.
	Electromagnetic safety door switch	When the X-ray is turned on, it locks itself and cannot open the door.
	emergency button	Located next to the operating position, press to immediately power off.
	X-ray tube protection	After turning off the X-ray, you can leave the software for other operations.

Software

functional module	Operation	Keyboard and mouse
	X-ray tube control	The X-ray can be turned on or off by clicking the button with the mouse, and the real-time tube voltage and tube current values are displayed next to it. The user can click the up and down buttons, or drag theslide bar, or manually enter the adjustment.
	Status Bar	By whether the red and green flashes alternately, it prompts the interlock status and preheat statusState and X-ray switch state.
	Image effect adjustment	The brightness, contrast and gain of the image can be adjusted freely to achieve satisfactionEffect.
	Product list	The user can store the current or recall the previously stored Z-axis position, brightness, contrast, gain and other parameters. The same product can be directlyrecalled next time to improve the inspection efficiency.
	Navigation window	After the camera takes a photo of the platform, clickon any position of the photo, and the platform will move until the position is displayed on the screen.
	Motion axis state	Display real-time coordinates.
	Test results	Display each measurement result in sequence (bubble ratio, distance, surfaceProduct and other measurement items set by the customer).
	speed control	The moving speed of each axis can be adjusted to slow speed, normal speed and fast speed.
Bubble rate measurement	Automatic calculation	Click two points to determine a rectangle. The software automatically finds and measures the solder ball edges, pads and internal bubbles in the rectangle, and can get the solder ball bubble rate, solder bal area, circumference, maximum bubble ratio, length, width and other data , And use red and green toindicate NG or OK.
	Adjustment parameters	The user can adjust the grayscale threshold, pixel,contrast, size filter and other parameters to get the accurate result of the automatic calculation.
	Add bubbles manually	Users can draw polygons or free graphics, which are calculated into the bubble rate as bubbles.

 

Bubble rate measurement	Store parameters	The user can store the grayscale threshold, pixel, contrast, size filter and other parameters of the current measurement bubble, and the same product can be called directly next time to improve thedetection efficiency.
Other measurement functions	distance	Click the two points A and B to set the reference line as needed, and then click point C to measure thevertical distance from point C to the reference line.
	Distance ratio	It is mostly used to measure the through-hole tin rate of the circuit board. A point D is set more than the measured distance. The vertical distance from point D to the reference line is divided by the vertical distance of point C to obtain the percentage ratio ofthe vertical distance of D to C.
	angle	Click the two points A and B to set the baseline as needed, and then click point C to measure the anglebetween the BA and BC rays.
	Round shape	It is mostly used to measure round components such as solder balls. Click three points to confirm a circle,and measure the circumference, area and radius.
	Square	It is mostly used to measure square components, click two points to confirm a square, and measure the length, width and area.
automatic detection	Set location manually	The user can set any position on the platform as a detection point, and the software will automatically take and save the picture.
	Array	For the inspection points with regular arrangement, the user only needs to set two inspection points and the number of rows and columns, and the software will automatically take each inspection point and savethe picture.
	Automatic Identification	For the detection points with obvious characteristics, the software can automatically identify the specific location, perform the measurement, and save thepicture.

X-RAY applications

BGA solder connection

BGA bubble

PCB Through-hole through tin

IC Bubbles and gold thread

LED Welding bubbles

Led gold wire broken

Capacitance

Inductor

Sensor

Semiconductor discharge tube TSS

Glass fiber plastic

Cable

Diode

Steel pipe welding gap

Car chisp