Feature
Basic SpecificationDirect connectivity with NPM-D3/W2Placement head (Lightweight 8- nozzle head & 3-nozzle head V2)Selectable & configurable supply unit specAdoption of Multi Recognition CameraAlternate & independent mounting support
Changeover capabilityMulti Recognition CameraHigh productivity through fully independent placementSupport Pin Automatic Change (option)
Productivity/VersatilityFeeder cart changeover spec（option）Inspection option before pick-upTransfer Unit（option）
Basic Specification
Direct connectivity with NPM-D3/W2
Connecting with NPM-D3/W2 enables high area productivity & versatile line configurations
*M-size dual conveyor(option)is required for direct connection with NPM-W2.
Placement head (Lightweight 8- nozzle head & 3-nozzle head V2)
Selectable Lightweight 8-nozzle head/3-nozzle head V2 to support odd-shaped components capability.3-nozzle head V2 placement load: max. 100 N
Selectable & configurable supply unit spec
Lines can be configured according to parts supply forms by rearranging a tray feeder/cart
Adoption of Multi Recognition Camera
Higher speed recognition inspection of parts in the height direction enables high-speed and stable mounting of odd-shaped components
Alternate & independent mounting support
Optimum mounting methods can be selected according to production PCB
Changeover capability
Multi Recognition Camera
Recognition data is consolidated with NPM-D3/W2. In addition, the recognition speed became higher including vertical inspection of parts condition.
High productivity through fully independent placement
Capable of fully independent placement of tray components improving cycle time of mid-, large-sized component placement with 3-nozzle head V2. Output of entire line is enhanced.
Support Pin Automatic Change (option)
Automate position change of support pins to enable non-stop changeover and help save man-power and operation errors.
Productivity/Versatility
Feeder cart changeover spec (option)
Tray feeder and 17 inputs feeder cart and be exchanged at customer side to enable equipment configuration according to parts supply forms.
Inspection option before pick-up
Inspect tray or reel components before pick-up to prevent misplacement.
Transfer Unit (option)
Handle PoP components (Tape, Tray) by installing the multi-functional transfer unit at the 13 fixed feeder bank in the rear of the machine.
*Transfer unit (using 8 input slots) can be used only with the Lightweight 8-nozzle head & 3-nozzle head V2.
Specification
Model ID | NPM-TT2 | ||
PCB dimensions (mm) | PC size | Single-lane mode | L 50 x W 50 ~ L 510 x W 590 |
Dual-lane mode | L 50 x W 50 ~ L 510 x W 300 | ||
M size | Single-lane mode | L 50 x W 50 ~ L 510 x W 510 | |
Dual-lane mode | L 50 x W 50 ~ L 510 x W 260 | ||
PCB exchange time | Single-lane mode | 4.0 s (With no component mounted on the reverse side of PCB) | |
Dual-lane mode | 0 s* *No 0s when cycle time is 4.0 s or less | ||
Electric source | 3-phase AC 200, 220, 380, 400, 420, 480 V 2.5 kVA | ||
Pneumatic source | Min.0.5 MPa, 200 L /min (A.N.R.) | ||
Dimensions *1 (mm) | W 1 300*2 x D 2 798*3 x H 1 444*4 | ||
Mass | 2 690 kg (Only for main body:This differs depending on the option configuration.) | ||
Placement head | Lightweight 8-nozzle head(Per head) | 3-nozzle head V2 *5(Per head) | |
Placement speed | PC size | 18 000 cph (0.20 s/chip) | 7 200 cph (0.50 s/chip)5 900 cph (0.61 s/QFP) |
M size | 17 460 cph (0.21s/chip) | 6 984 cph (0.52 s/chip)5 723 cph (0.63 s/QFP) | |
Placement accuracy(Cpk□1) | ± 40 µm/chip± 30 µm/QFP□12mm to □32mm ± 50 µm/QFP □12mm Under | ±40 μm/ chip±30 μm/ QFP | |
Componentdimensions(mm) | 0402 chip*6 to L 32 x W 32 x T 12 | 0603 chip to L 150 x W 25 (diagonal152) x T 30 | |
Component supply | Taping | Tape : 4 to 56 / 72 mm | Tape : 4 to 56 / 72 / 88 / 104 mm |
Specifications for front/rear tray feeders : Max.52Specifications for front/rear feeder carts : Max.120 (Tape:4, 8 mm) | |||
Stick | Specifications for front/rear tray feeders : Max.12 (Single stick feeder) | ||
Specifications for front/rear feeder carts : Max.28 (Single stick feeder) | |||
Tray | Max.40 (Front supply unit : Max. 20 + Rear supply unit : Max. 20) | ||
*1: Only for main body.
*2: 1 820 mm in width if extension conveyors (260 mm) are placed on both sides.
*3: Dimensions shown are specifications for front/rear tray feeders. Dimensions of specifications for front/rear feeder carts: 2 893 mm.
*4: Excluding the monitor, signal tower and ceiling fan cover.
*5: 3-nozzle head V2 cannot be installed on NPM-D3.
*6: The 0402 chip requires a specific nozzle/feeder.
*Placement tact time, inspection time and accuracy values may differ slightly depending on conditions.
*Please refer to the specification booklet for details.
Hot Tags: panasonic smt chip mounter npm-tt2, china,manufacturers, suppliers, wholesale, buy,factory